Thermal Grizzly is proud to announce the first category in our new DeltaMate product line: water–cooling fittings. The DeltaMate fittings can be combined to accommodate virtually any tubing configuration. They support soft tubes (ST) with 16 mm OD / 10 mm ID and hard tubes (HT) with a 16 mm outer diameter. All fittings are machined from brass and finished with a matte-black chromium plating.
We’re launching with nine modular products divided into four categories:
- DeltaMate Fitting
- DeltaMate Rotary
- DeltaMate Extender
- Accessory fittings for water cooling
Overview of the individual Fittings
DeltaMate Fitting - ST16
- Single tapered barb allows straightforward installation for a wide range of flexible tubes.
- Knurled compression ring securely grips the tubing with high retention force.
- Compact overall dimensions facilitate installation in almost any watercooling loop.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Robust design allows installation with an 8mm hex key.
DeltaMate Fitting - HT 16
- Flat base enables tubing to be installed from any direction with complete visibility.
- High surface area custom O-ring securely grips the tubing with high retention force.
- Compact overall dimensions facilitate installation in almost any watercooling loop.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Robust design allows installation with an 8mm hex key.
DeltaMate Rotary - 90°
- Small dimensions allow modular combination with other DeltaMate Rotary and Extender Fittings.
- Subsequent fittings mechanically lock the rotary joint together for maximum security.
- Includes an optional aesthetic cover with DeltaMate logo that can be rotated to any orientation.
- Elegant and minimal design integrates seamlessly with all DeltaMate fittings.
- Easy to install in tight places and SFF builds using an 8mm hex key.
DeltaMate Rotary - T
- Small dimensions allow modular combination with other DeltaMate Rotary and Extender Fittings.
- Subsequent fittings mechanically lock the rotary joint together for maximum security.
- Includes an optional aesthetic cover with DeltaMate logo that can be rotated to any orientation.
- Elegant and minimal design integrates seamlessly with all DeltaMate fittings.
- Easy to install in tight places and SFF builds using an 8mm hex key.
Delta Mate Extender - MF7
- Can be combined with two DeltaMate Rotary - 90° to create a Double Rotary with an offset of 28mm.
- Practical fixed length extender to increase the spacing between ports and fittings by 7mm.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Robust design allows installation with an 8mm hex key.
DeltaMate Extender - MF 10
- Can be combined with a DeltaMate Rotary to create a direct replacement for conventional rotary fittings.
- Practical fixed length extender to increase the spacing between ports and fittings by 10.5mm.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Robust design allows installation with an 8mm hex key.
DeltaMate Extender - MF 14
- Practical fixed length extender to increase the spacing between ports and fittings by 14mm.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Robust design allows installation with an 8mm hex key.
DeltaMate Extender - MF28
- Commonly used to add clearance for memory modules and fans or two parallel tubes in the same plane.
- Practical fixed length extender to increase the spacing between ports and fittings by 28mm.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Robust design allows installation with an 8mm hex key.
DeltaMate Plug
- Simple low profile plug that can be used to block any G1/4" female ports.
- Includes an optional aesthetic cover with DeltaMate logo that can be rotated to any orientation.
- Consistent outer diameter with all DeltaMate fittings for completely seamless integration.
- Easy to install in tight places and SFF builds using an 8mm hex key.