The thermal pad is silicone based with modelling clay like consistency. This allows a perfect surface shaping with maximum possible compression. The minus pad extreme is electrically insulating.
Due to the consistency only one-time use is recommended. The thermal conductivity was improved by about 260 % over the minus pad 8 which allows best cooling for tough cooling operations such as voltage regulators and memory ICs.
- Most excellent thermal conductivity
- No bleeding
- long-term stability
- high compression rate
¹ within the capabilities of thermal pads
The minus pad extreme is available in size 120 x 20 mm and 100 x 100 mm with thicknesses of 0,5mm, 1mm, 1,5mm, 2mm, 3mm.
|Hardness||Shore 00 - 65|
|Typical thickness tolerance||± 0,1 mm|
|Electically insulating||Ja (8 KV/mm ASTM D149)|
|Temperature Range||-100 °C / +200 °C|