Thermal Grizzly Ryzen 7000 Direct Die Frame Mounting Frame

Direct Die Frame

The AMD Ryzen 7000 Direct Die Frame V2 is a CPU mounting frame for mounting without the integrated heatspreader. By omitting the heatspreader, the CPU cooler can be mounted directly onto the processor's chiplets, allowing for significantly lower temperatures.

$22.11

Content: 1 pieces

CPU Type

Ryzen 7000

Ryzen 7000 V2

EAN: 4260711990908 Copied!

MPN: TG-DDF-R7000-V2 Copied!

Product information "Ryzen 7000 Direct Die Frame V2"

The Ryzen 7000 Direct Die Frame V2 is a CPU mounting frame for mounting CPUs without the integrated heatspreader. The V2 variant of the AMD Ryzen 7000 Direct Die Frame offers increased compatibility with AM5 CPUs, in particular the Ryzen 7000X3D processors.

We strongly advise you to follow all the instructions below!

Enhanced Compatibility and Optimal Cooling Performance

The Ryzen Direct Die Frame V2 (DDFV2) is a CPU mounting frame designed specifically for the AMD 7000 series X3D processors, but retains compatibility with non-X3D CPUs. It should be noted that the DDFV2 is not compatible with the Ryzen 8000G processors.

It is compatible with both the normal Ryzen 7000 processors and the X3D CPUs, so that these can be mounted with this direct die frame without the integrated heatspreader and without the Socket Actuation Mechanism (SAM). The changes to the Ryzen Direct Die Frame V2 compared to the AMD Ryzen 7000 Direct Die Frame were necessary after AMD subsequently added additional bonding points on the X3D CPUs.

properties

Compatible with AMD Ryzen 7000 & 7000X3D
Enables mounting of delidded Ryzen CPUs
Replaces Socket Actuation Mechanism (SAM)
Easy mounting
Anodized aluminum

Compatibility Note

The Ryzen 7000 Direct Die Frame V2 is NOT COMPATIBLE with the APUs of the Ryzen 8000G series as well as the CPUs of the Ryzen 9000 series, including the X3D variants.

(as of March 2025)

even contact pressure

lower CPU temperatures

easy installation

Allows mounting of delidded Ryzen CPUs

Scope of delivery

1× Ryzen 7000 Direct Die Frame V2
4× pan-head screws UNC thread 1/4"
1× hexagon socket wrench 5/64"
1× angle wrench Torx T20

Attention

Removing the heatspreader (“delidding”) of a processor is at your own risk!

The manufacturer's warranty expires when the CPU is delidded!

Damage caused by delidding the CPU is not covered by the manufacturer's warranty!

Removing the Socket Actuation Mechanism (SAM) of the mainboard may invalidate the manufacturer's warranty of the mainboard manufacturer!

Downloads "Direct Die Frame"

Color:	black
Material:	Aluminum
Socket manufacturer:	AMD
Socket type:	AM5

Goes perfectly with it:

Conductonaut Extreme

Liquid metal with minimal layer thickness for ultra-high-performance thermal conductivity in overclocking with increased material compatibility

From $27.96

Conductonaut

Liquid metal for overclocking: Highest efficiency and ultra-high thermal conductivity, perfect for experienced users

From $18.60

TG Kapton Insulation Sheet

Electrically non-conductive polyamide adhesive tape

From $6.90

TG Remove

Effective acetone-based nano-cleaner for removing thermal paste and liquid metal

$13.92

TG Applicator

Efficient applicators for the precise distribution of liquid metal thermal paste like Conductonaut

$5.73

TG Cleaning Wipes

Wet and dry cleaning wipes for cleaning surfaces

$12.75

TG Shield

High-temperature protective coating, protects against liquid metal, thermal paste, and short circuits

$13.92

Kryonaut

High thermal conductivity and long-term stability, ideal for overclocking and critical cooling systems in the industrial sector

From $11.58

Kryonaut Extreme

Maximum thermal conductivity and performance for extreme overclocking, high stability, and improved low-temperature resilience

From $23.28